Manufacturing Quality Iron Products for the Water and Wastewater Industries, Since 1981

Terms
 MySPP
800.999.3009

Split Stargrip® – Series 3000S

Split Mechanical Joint Wedge Action Restraint for New or Existing Ductile Iron Pipe  - Sizes 3" - 48"

Split Mechanical Joint Wedge Action Restraint. A circular metal clamp with blue screws and bolts evenly spaced around its perimeter. The clamp features rectangular cutouts and is designed to secure or tighten around another object. The metallic texture is smooth and reflective.

Information

The Split Stargrip® is used for restraining new or existing ductile iron mechanical joint fittings, valves, fire hydrants and all classes of ductile iron pipe. Split Stargrip® pressure rating per table on next page.

The unique split design makes installation fast and simple.

Downloads

File Type

  • Split design Stargrip® Series 3000S for easy installation on new or existing Ductile Iron Mechanical Joint systems.
  • Gland is made from high strength Ductile Iron per ASTM A536, Grade 65-45-12 and is compatible with all Mechanical Joints conforming to ANSI/AWWA C111/A21.11.
  • The Wedge Assembly is designed with a Break-Off Torque Control Head, ensuring proper installation.
  • Offers a full 5° deflection through 12˝ size, 3º on 14˝-24˝, 2º on 30˝-36˝ and 1º on 42˝-48˝.
  • Minimum safety factor of 2:1
  • The Wedges are heat treated to a minimum of 370 BHN.
  • The Wedge Assembly is designed to fit specific pipe sizes.
  • Clamping bolts per SAE J429 Grade 5 steel
  • Eliminates tie rods and thrust blocks
  • Standard gland color is Black.
  • Stargrip® may be used on steel pipe of any size. For steel pipe 12” and under a transition gasket is required if the diameter regimen is IPS. For steel pipe 14” and larger, the pipe’s outside diameter must be the same as ductile iron pipe (CIOD diameter regimen). For sizes 3” – 8”, minimum SCH40 steel pipe wall thickness is required. For sizes 10” through 16” the minimum wall thickness must be equal to or greater than PC350 ductile iron pipe. For sizes 18” and above, the minimum wall thickness of the steel pipe must be equal to or greater than PC 250 ductile iron pipe.

Restraint mechanism shall be of split design for use on new or existing mechanical joints. As the mechanism is activated, multiple wedging action shall be imparted against the pipe increasing its resistance as internal pressure increases. After burial of the restraining mechanism, joint flexibility shall be maintained.

The actuating bolt shall be threaded into the restraining wedge and have a 1-1/4″ hex operating head. The restraining twist off head bolt system shall have a torque-limiting feature designed to break off at preset torque levels, thus insuring proper action of restraining device. Glands shall be manufactured of high strength ductile iron in accordance with ASTM A536 Grade 65-45-12 requirements. The wedge shall be manufactured of high strength ductile iron and be heat treated to a minimum hardness of 370 BHN.

Applicable dimensions shall conform to ANSI/AWWA C111/A21.11 and shall be incorporated into the mechanical joint restraint so that the device facilitates use with standard mechanical joint bells.

The mechanical joint restraint mechanism shall have a maximum water working pressure of 350 PSI for sizes 3″-8″, 300 PSI for sizes 10″-16″, 200 PSI for sizes 18″-36″ and 175 PSI for sizes 42″-48″. All sizes shall have a minimum safety factor of 2:1 (i.e. twice the maximum pressure rating of the restraint). The restraint mechanism shall be Star® Pipe Products Split Stargrip® series 3000S or an approved equal.

*Please refer to the catalog for further details and specifications.

  • Product Categories

  • Resources

  • News & Events

  • View Archive