Manufacturing Quality Iron Products for the Water and Wastewater Industries, Since 1981

Terms

MySPP

800.999.3009

PVC Pipe Restrainers – Series 1000

1000C Restrainers for AWWA C900 PVC Pipe and MJ or Push-On Fittings 1000S Restrainer for IPS PVC and MJ or Push-On Fittings Sizes 4" - 48"

Pipe Restrainers Series 1000. Series 1000 PVC Pipe Restrainers for Joint Restraint

Information

The Series 1000 provides joint restraint between PVC pipe and ductile iron fittings. The device works with fittings with either mechanical joint ends or push-on, and it may be installed on new or existing systems. Mechanical joint restraints totally eliminate the need for thrust blocks. The restraints have internal serrations that lock onto the pipe and give 360 degrees of contact and pipe wall support. These restraints may be used with PVC pipe made to either a CIOD or IPS OD diameter regimen.

Downloads

File Type

Submittal

360° contact, no pipe distortion or point loading and supports the wall of the pipe
Made of Ductile Iron – ASTM Grade A536, Grade 65-45-12
Restrainers work with Mechanical Joint Fittings (Table A) or Push-On Fittings (Table B) of the catalog.
All restrainers are machined to exact tolerances.
Rated pressures carry a 2:1 safety factor.
Can be installed outside the trench, to ease installation
Maintains full deflection on Mechanical Joint and Push-On Fittings
T-Bolts/Rods/Hex Nuts: low alloy steel per ANSI/AWWA C111/A21.11
Clamping Bolts: SAE J429 Grade 5
Series 1000C is approved by Factory Mutual Research in sizes 4″ – 6″ for use on C900 PVC DR18 for 150 PSI.
Standard color is Graphite Black (RAL 9011).
Casting halves for IPS PVC pipe are painted Moss Green (RAL 6005).

PVC restraint devices shall be manufactured of high strength ductile iron in accordance to ASTM A536 Grade 65-45-12 for all sizes. Internal serrations will be machined to provide exact tolerances to provide 360° contact and support of the pipe wall. PVC Restraint devices shall have a safety factor of 2:1 over the pressure rating.